Hangzhi-precisie

Hoge Precisie Huidige Omvormer, Voltagetransducer & Meetapparaat Fabrikant

Stroomomzetters met vaste en met gesplitste kern, welke is beter?

/ Blog / Door
stroomomzetters met vaste kern vs. stroomomzetters met gesplitste kern

Current transducers are used to measure the current in a circuit and are a key component of every power monitoring system. Common examples include Hall current sensors, fluxgate current sensors, Shunt Resistor Transducers, Current Transformers, Rogowski coils, etc.

Inhoudsopgave

Current Transducer Types

There are two main types of current transducers: Solid core huidige transducers en Split core current transducers. The main difference between solid core and split core current transducers (CTs) is how they are installed.

Solid core current transducers

Require the conductor to be disconnected before installation. They have a permanently closed, toroidal (donut) shaped core that the conductor must pass through. Solid core CTs are often used in new installations and are more accurate than split core CTs. However, they can be difficult to install in tight spaces or in situations where the electrical system needs to remain operational.

Split core current transducers

Have a hinged core that can be opened and closed to pass the conductor through without disconnecting it. Split core CTs are often used in retrofit installations because they are easier to install and don’t disrupt the wiring. However, they may be less accurate than solid core CTs.

Choosing the right current transducers

When choosing between a solid core and split core CT, you can consider things like:

Accuracy and Precision

Accuracy refers to how close the transducer’s readings are to the actual current. Precision is about how consistently the transducer provides the same reading for the same current.

High accuracy ensures the transducer gives correct readings, while high precision means it consistently provides those correct readings. Look for a transducer with low error margins and minimal variations in its measurements.

This is especially important in critical applications where precise current monitoring is needed, such as in power systems or sensitive equipment.
Solid core CTs are generally more accurate than split core CTs.

Environmental Conditions, Mounting and Installation

Consider the operating environment, including temperature range, humidity, and potential exposure to chemicals or vibration, and choose a transducer that can withstand these conditions.

Ensure the transducer’s mounting and installation requirements align with your system’s capabilities and constraints. Isolation is also one of the factors in choosing sensors. Ensure the transducer provides adequate electrical isolation for safety and to prevent signal interference.

Split core CTs are easier to install and don’t disrupt the wiring.

Cost and Effective

The cost of the sensor is a significant factor, especially in the design phase where companies aim to lower costs and reduce risks. There is a choice between off-the-shelf sensors, which are generally more cost-effective, Solid core CTs are generally less expensive than split core CTs.

Use case

Solid core CTs are better for critical monitoring, while split core CTs are better for installations where power shouldn’t be disrupted.

Over Hangzhi

Shenzhen Hangzhi Precision Electronics Co., Ltd. is een technologisch toonaangevend bedrijf dat zich toelegt op onderzoek en ontwikkeling, productie, verkoop en klantspecifieke oplossingen van zeer nauwkeurige stroomsensoren, spanningssensoren en zeer nauwkeurige elektrische meetinstrumenten. We streven ernaar om een bekend merk van fluxgate precisie-stroomsensoren en elektrische precisiemeetinstrumenten op het gebied van DC, en streven ernaar zich te ontwikkelen tot een internationaal toonaangevende leider in precisie-elektronica op het gebied van DC-systemen.

nl_BENederlands (België)
en_USEnglish es_ESEspañol pt_PTPortuguês fr_FRFrançais de_DEDeutsch ru_RUРусский arالعربية nl_NLNederlands tr_TRTürkçe pt_BRPortuguês do Brasil en_CAEnglish (Canada) en_GBEnglish (UK) ko_KR한국어 ja日本語 en_AUEnglish (Australia) de_ATDeutsch (Österreich) pl_PLPolski fr_BEFrançais de Belgique da_DKDansk sv_SESvenska de_CHDeutsch (Schweiz) it_ITItaliano en_ZAEnglish (South Africa) ro_RORomână hu_HUMagyar cs_CZČeština fiSuomi id_IDBahasa Indonesia elΕλληνικά es_AREspañol de Argentina es_CLEspañol de Chile es_PEEspañol de Perú es_MXEspañol de México nl_BENederlands (België)

Selecteer land