Hangzhi-precisie

Hoge Precisie Huidige Omvormer, Voltagetransducer & Meetapparaat Fabrikant

5 Belangrijke tips voor het installeren van een DC-stroomsensor

/ Blog / Door
DIT-stroomsensor

De DC current sensor is a reliable and technologically advanced DC large current measuring instrument, which is widely used in metallurgy, chemical industry, carbon and other industries. The instrument can output standard voltage and current signals at the same time, and is used to match other instruments as a signal source for monitoring and control. The product consists of a sensor head and a signal box. The sensor head is a split frame aluminum alloy shell structure, and the circuit box is a waterproof, anti-corrosion, and electrostatically shielded aluminum alloy shell. It is mainly used in metallurgy, chemical industry, carbon and other industries as a large current precision measurement and detection device, and can also be used as a control element.

Whether the DC current sensor is correctly installed has a great impact on the use effect. In order to ensure the normal use of the DC current sensor in the future, it is also very important to install the equipment correctly. Let us share some installation tips below.

  1. Determine the installation method according to the site conditions and the size of the sensor head, and then make the bracket base plate (or pad) according to the required size. The bracket base plate material can be made of non-magnetic materials such as plastic board, epoxy board, bakelite board or hardwood board. If ferromagnetic material is used as the sensor head installation bracket, non-magnetic materials such as wood blocks should be used as pads to keep the distance between the sensor and the bracket greater than 80 mm.
  2. The conductive busbar to be measured should be placed in the center of the sensor head window and required to be perpendicular to the sensor plane.
  3. The installation position of the sensor head should be as far away from other conductive busbars as possible and away from the corners of the busbar to be measured.
  4. The distance between the circuit box and the sensor head is recommended to be within 10 meters, and the special cable can be lengthened as needed.
  5. The cable plug and the two sockets in the lower half ring of the sensor head can be connected arbitrarily, and the remaining socket in the lower half ring is connected to the socket in the upper half ring with a jumper cable.

Over Hangzhi

Shenzhen Hangzhi Precision Electronics Co., Ltd. is een technologisch toonaangevend bedrijf dat zich toelegt op onderzoek en ontwikkeling, productie, verkoop en klantspecifieke oplossingen van zeer nauwkeurige stroomsensoren, spanningssensoren en zeer nauwkeurige elektrische meetinstrumenten. We streven ernaar om een bekend merk van fluxgate precisie-stroomsensoren en elektrische precisiemeetinstrumenten op het gebied van DC, en streven ernaar zich te ontwikkelen tot een internationaal toonaangevende leider in precisie-elektronica op het gebied van DC-systemen.

nl_BENederlands (België)
en_USEnglish es_ESEspañol pt_PTPortuguês fr_FRFrançais de_DEDeutsch ru_RUРусский arالعربية nl_NLNederlands tr_TRTürkçe pt_BRPortuguês do Brasil en_CAEnglish (Canada) en_GBEnglish (UK) ko_KR한국어 ja日本語 en_AUEnglish (Australia) de_ATDeutsch (Österreich) pl_PLPolski fr_BEFrançais de Belgique da_DKDansk sv_SESvenska de_CHDeutsch (Schweiz) it_ITItaliano en_ZAEnglish (South Africa) ro_RORomână hu_HUMagyar cs_CZČeština fiSuomi id_IDBahasa Indonesia elΕλληνικά es_AREspañol de Argentina es_CLEspañol de Chile es_PEEspañol de Perú es_MXEspañol de México nl_BENederlands (België)

Selecteer land