Table des matières
What is a Current Transducer?
Current transducer is a device that converts an electrical current into a proportional output signal. This output signal can be in the form of voltage, current, or frequency, depending on the transducer’s design. By utilizing various sensing techniques, current transducers provide accurate measurements of current without the need to interrupt the circuit being monitored.
Types of Current Transducers
There are various kinds of current transducers that are out there. such as Shunt Resistor, Hall Effect Current Sensors, Current Transformer and Fluxgate Current Sensor are some of the most common types. Each type has its own advantages and disadvantages.
How to judge the quality of current transducer
Accuracy and Linearity
Accuracy and linearity are equally important considerations for transducer. The accuracy is how closely its readings match the real values, while its linearity of a sensor is its ability to retain a consistent sensitivity over its measurement range. Compare the output of the transducer with a calibrated reference meter or an accurate current source over the expected measurement range. To guarantee precise and trustworthy readings, a sensor with good accuracy and linearity should be used.
High-precision transducers should have low error rates and provide consistent, reliable readings. Hangzhi AIT Series High Precision Current Transducer’s accuracy 10ppm, linearity 2ppm.
Consider Right Measurement Range
Current sensors have a certain range of current and can measure with high precision; This range is called its measurement range. It is crucial to choose sensors with a measurement range. If the range is too high, sensor overload is a risk, while if the range is too low, the entire current range cannot be measured. The resolution of the sensor or the minimum current change it can detect is also crucial. Ensure the current transducer can cover the desired application range, from low to high currents.
Response Time
Le temps de réponse correspond au temps nécessaire à un capteur pour enregistrer les variations de courant et générer les signaux de sortie appropriés. Le choix d'un capteur ayant un temps de réaction rapide garantit des lectures précises et opportunes. Si le temps de réaction est trop long, le capteur ou le circuit risque d'être endommagé dans les situations où le courant varie constamment.
Evaluate Output Signal Type
Check the type of signal that the current transducer sends out. Typical output types include digital signals and analog signals (current or voltage). Verify that the transducer’s output signal is compatible with your control system or data acquisition device.
Isolation and Safety
Current transducers should electrically isolate the measurement circuit from the high-voltage power circuit to prevent damage to the measurement equipment. Verify the isolation voltage rating of the transducer, ensuring it is adequate for the system’s electrical safety standards.
Environmental Conditions, Mounting and Installation
Tenez compte de l'environnement de travail, notamment de la plage de température, de l'humidité et de l'exposition potentielle à des produits chimiques ou à des vibrations, et choisissez un transducteur capable de résister à ces conditions.
Ensure the transducer’s mounting and installation requirements align with your system’s capabilities and constraints. Isolation is also one of the factors in choosing sensors. Ensure the transducer provides adequate electrical isolation for safety and to prevent signal interference.
Check Compatibility with Existing Systems
Vérifiez la compatibilité du transducteur actuel avec vos systèmes existants. Assurez-vous que la taille physique du transducteur, les options de montage et les connexions électriques s'intègrent parfaitement à votre installation.
La compatibilité réduit la nécessité d'apporter des modifications supplémentaires et garantit une intégration harmonieuse. Vérifiez que le transducteur répond aux normes et aux spécifications requises pour votre système.
Compliance, Standards and Cost
Check that the transducer meets any relevant industry standards and regulations for your application. Consider the cost of the transducer in relation to your budget and the value it provides in terms of performance and reliability.
How to confirm the accuracy of the current sensor parameters?
The most direct way is to send it to the Institute of Metrology for testing and check it based on their report.
À propos de Hangzhi
Shenzhen Hangzhi Precision Electronics Co., Ltd. est une entreprise à la pointe de la technologie qui se consacre à la recherche et au développement, à la production, à la vente et à la personnalisation de solutions pour les capteurs de courant de haute précision, les capteurs de tension et les instruments de mesure électrique de haute précision. Nous nous efforçons de créer une marque réputée de capteurs de courant, de capteurs de tension et d'instruments de mesure électrique de haute précision. fluxgate des capteurs de courant de précision et des instruments de mesure électrique de précision dans le domaine du courant continu, et s'efforcer de devenir un leader international de l'électronique de précision dans le domaine des systèmes à courant continu.
Français de Belgique 
English 
Español 
Português 
Français 
Deutsch 
Русский 
العربية 
Nederlands 
Türkçe 
Português do Brasil 
English (Canada) 
English (UK) 
한국어 
日本語 
English (Australia) 
Deutsch (Österreich) 
Polski 
Nederlands (België) 
Dansk 
Svenska 
Deutsch (Schweiz) 
Italiano 
English (South Africa) 
Română 
Magyar 
Čeština 
Suomi 
Bahasa Indonesia 
Ελληνικά 
Español de Argentina 
Español de Chile 
Español de Perú 
Español de México