Hangzhi BMS Series Automotive Current Sensor
The BMS series automotive current sensor based on fluxgate technology is a high-performance current measurement device, which is suitable for the battery management system of electric vehicles. It can monitor the charging and discharging current of the battery pack in real time, and control and protect it by sending signals to the BMS. The sensor has the advantages of high precision, low power consumption, strong anti-interference ability, and good measurement stability. It is the best choice for BMS current measurement with increasingly high requirements.
Why our Client Chooses BMS Series Automotive Current Sensor?
Traditional shunt and Hall current sensors face many challenges in future BMS current measurement. As we all know, the configuration of high current has advantages for fast charging and fast discharging. As the industry’s demand for DC fast charging increases, the current range of the battery pack continues to increase. In the case of a large range, it is required to maintain high accuracy in the full range. The measurement accuracy and zero point error of these traditional sensors can no longer meet the requirements. In addition, customers’ requirements for active cooling and thermal control of battery energy distribution units (Battery energy Distribution Unit, BDU) are also increasing, and shunt resistors are prone to heat and aging. Therefore, it is very necessary to develop a current sensor with high performance, high precision and strong anti-interference ability.
Compared with traditional shunts and Hall current sensors, the BMS automotive current sensor with fluxgate technology has higher precision and lower zero point error, and can still maintain high precision and provide accurate measurement in a large range result.
In addition, another significant advantage of fluxgate technology is that it does not need to consider the problem of heat generation, which avoids the aging problem caused by the heat generation of shunt resistors.
The fluxgate sensor also has a strong ability to resist magnetic interference and external interference. This can greatly reduce the impact of electromagnetic interference on the performance of the car, prevent interruption or misalignment of the transmission signal, thereby further improving system accuracy and stability, and providing a safer, more reliable, and more efficient battery management system for new energy vehicles.
At the same time, it is easier to use. The Hangzhi BMS automotive current sensor has direct CAN signal output, which does not require additional calibration and calibration at the customer system level, helping customers save a lot of development costs and time, and avoiding the use of shunts that require additional temperature compensation and calibration. calibration.
Furthermore, it is naturally insulated from the high-voltage bus, which can ensure the safety of the system.
New energy vehicle BMS automotive current sensors are generally installed in the current loop between the battery pack and the electric drive system. Specifically, a current sensor should be installed between the positive terminal of the battery pack and the controller of the electric drive system to measure the current flow between the battery pack and the electric drive system.
General Specifications of BMS Series Automotive Current Sensor
- High precision: 0.5%
- Linearität: 0.1%
- Low temperature drift, low zero drift, high temperature resistance
- Messbereich: ±300A/ ±500A/±1500A
- Power supply: 8-16V
- Aperture: 24.2mm
- Output: CAN bus
- Working temperature: -40-85℃
- Adapter connector: TE MPN 1473672-1
- High reliability: multiple self-inspection, multiple hardware protection, CRC check to ensure reliable communication