Current transducers are used to measure the current in a circuit and are a key component of every power monitoring system. Common examples include Hall current sensors, fluxgate current sensors, Shunt Resistor Transducers, Current Transformers, Rogowski coils, etc.
جدول المحتويات
Current Transducer Types
There are two main types of current transducers: Solid core المحولات الحالية و Split core current transducers. The main difference between solid core and split core current transducers (CTs) is how they are installed.
Require the conductor to be disconnected before installation. They have a permanently closed, toroidal (donut) shaped core that the conductor must pass through. Solid core CTs are often used in new installations and are more accurate than split core CTs. However, they can be difficult to install in tight spaces or in situations where the electrical system needs to remain operational.
Have a hinged core that can be opened and closed to pass the conductor through without disconnecting it. Split core CTs are often used in retrofit installations because they are easier to install and don’t disrupt the wiring. However, they may be less accurate than solid core CTs.
Choosing the right current transducers
When choosing between a solid core and split core CT, you can consider things like:
الدقة والدقة
تشير الدقة إلى مدى قرب قراءات محول الطاقة من التيار الفعلي. أما الدقة فتتعلق بمدى اتساق محول الطاقة في توفير نفس القراءة لنفس التيار.
High accuracy ensures the transducer gives correct readings, while high precision means it consistently provides those correct readings. Look for a transducer with low error margins and minimal variations in its measurements.
وهذا مهم بشكل خاص في التطبيقات الحرجة التي تتطلب مراقبة دقيقة للتيار، مثل أنظمة الطاقة أو المعدات الحساسة.
Solid core CTs are generally more accurate than split core CTs.
Environmental Conditions, Mounting and Installation
Consider the operating environment, including temperature range, humidity, and potential exposure to chemicals or vibration, and choose a transducer that can withstand these conditions.
Ensure the transducer’s mounting and installation requirements align with your system’s capabilities and constraints. Isolation is also one of the factors in choosing sensors. Ensure the transducer provides adequate electrical isolation for safety and to prevent signal interference.
Split core CTs are easier to install and don’t disrupt the wiring.
Cost and Effective
The cost of the sensor is a significant factor, especially in the design phase where companies aim to lower costs and reduce risks. There is a choice between off-the-shelf sensors, which are generally more cost-effective, Solid core CTs are generally less expensive than split core CTs.
Use case
Solid core CTs are better for critical monitoring, while split core CTs are better for installations where power shouldn’t be disrupted.
حول هانغزي
شنتشن Hangzhi الدقة للإلكترونيات المحدودة هي شركة رائدة في مجال التكنولوجيا مكرّسة للبحث والتطوير والإنتاج والمبيعات وتخصيص الحلول لأجهزة استشعار التيار عالية الدقة وأجهزة استشعار الجهد وأدوات القياس الكهربائية عالية الدقة. نحن نسعى جاهدين لبناء علامة تجارية مشهورة من بوابة التدفق أجهزة الاستشعار الدقيقة للتيار وأدوات القياس الكهربائية الدقيقة في مجال التيار المستمر، وتسعى جاهدة للتطور لتصبح شركة رائدة عالميًا في مجال الإلكترونيات الدقيقة في مجال أنظمة التيار المستمر.
العربية 
English 
Español 
Português 
Français 
Deutsch 
Русский 
Nederlands 
Türkçe 
Português do Brasil 
English (Canada) 
English (UK) 
한국어 
日本語 
English (Australia) 
Deutsch (Österreich) 
Polski 
Nederlands (België) 
Français de Belgique 
Dansk 
Svenska 
Deutsch (Schweiz) 
Italiano 
English (South Africa) 
Română 
Magyar 
Čeština 
Suomi 
Bahasa Indonesia 
Ελληνικά 
Español de Argentina 
Español de Chile 
Español de Perú 
Español de México